ELECTROMEGNETIC FLOWMETER

Electromagnetic Flowmeter is flange type electromagnetic flowmeter,can be used in compact or separate model with converter, designed to measure volume flow rate of conductive liquids more than 5 us/cm,and also for volume flowrate measurement of strong acid and alkali etc strong corrosive liquid and slurry,pulp,paper pulp etc fluids with liquid solid suspension.
Widely used in petroleum,chemical, metallurgical, textile, paper making, food etc industries, water conservancy construction,river dredging areas.

Specification

Measured Medium	Acid,alkali,sea water etc strong corrosive or unpurified all conductive liquid
Range/Flowrate	‘0.14 to 25434 m3/h; 0.5 to 10 m/s
Diameter(mm)	Pipe type F4/PTFE liner:DN10 – DN600 Pipe type Rubber liner:DN40 – DN2000
Accuracy/Repeatability	Accuracy ±0.5%, Repeatability:≤0.1% Accuracy ±1.0%, Repeatability:≤0.2%
Range ratio	6/1/1900 06:01:00
Measured Medium Temperature	Rubber liner:-20°C to 60°C PTFE liner: -30°C to 120°C High tempetature PTFE liner:-20° to 160°C
Rated Working Pressure	DN10-DN50 ≤ 4 MPa; DN65-DN200 ≤ 1.6MPa DN250-DN1000 ≤ 1 MPa; DN1200-DN2000 ≤ 0.6MPa
Signal Output	‘4-20 mA(Load Resistor 0-7500 ꭥ),Pulse/frequency,Control level
Communication Output	RS485 MODBUS communication,HART protocal,MODBUS protocal
Power Supply	220 VAC ±15%, or 24 VDC,Ripple ≤ 5%
Process Connection	Flange connection,sanitary tri-clamp
Explosion-proof class	Exd[iaq]IICT5
Protection class	IP65;IP68 for separate model with converter,can be submerfible
Environment Temperature	‘-25°C to 60°C
Relative Humidity	5% – 95%
Power Consumption	Less than 20W

Liner Material	Mark	Temperature	Suitable Liquid	Suitable DN
Rubber	‘CR PU F4(PTEP)	<60°C <60°C <120°C	Tap water,industrial water,sea water Pilp,Ore slurry or other slurry Strong corrosive Acid,Alkali,Salt liquid	DN50-2000 DN25-500 DN25-1600
Fluorine Plastic	F46(FEP) PFA	<120°C <160°C	Corrosive Acid,Alkali,Salt liquid Corrosive Acid,Alkali,Salt liquid	DN10-200 DN10-300