TURBINE FLOWMETER

Overview: Turbine Flowmeter is used advanced technogy, to be designed ad high quality,good repeatability, fast response, easy installation,widely applicaable for flow rate measurement of pure liquid under 5X10-6 m2/S. whice should be non-corrosive to 1 Cr18Ni9Ti, 2Cr13 stainless steel,corundum A1203,and hard alloy in closed pipe. Widely used in Tap water, pure water, alcohol,gasoline, diesel, kerosene,hydraulic oil,LPG and pure liquid without any acid corrosion with flow viscosity under 5×10-6 m2/s.
Feature:
• High Accuracy: ±1%R, ±0.5%R;0.2%R (Customized)
Wide range:DN4 to DN200; Flowrate:0.04m3/h to 800 m3/h
Process connection; thread,flang
Output:Pulse, 4-20mA, RS485, Hart
High signal resolution for high frequency signal(3-4 KHz)
Pulse output signal can be for totalizer control system application, without zero shift, high anti-interference

Process Fluid	Pure,non-corrosive Liquid,without purity Water,pure water,diesel,methanol	Process Connection Sensor Material	Thread,Flange 403SS,306SS,306LSS
Range	‘0.04m3/h to 800m3/h	Pressure Rate	4Mpa,6.3Mpa,10Mpa,16Mpa,25Mpa
Size	DN4 to DN40(Thread installed) DN15 to DN200(Flange installed)	Output Electrical Connector	Pulse,4-10mA,RS485,Hart protocal Cable directly,M20X1.5
Accuracy	±1%R,±0.5%R;0.2%R(Customized)	Housing Material	Aluminium Alloy
Repeatability	0.05% to 0.2% in short time	Enclosure Class	IP55 or higher customized
Fluid Temperature	‘-20 °C to 120°C	Explosion-proof class	ExiaII CT4 or ExdII BT6
Range ratio	1:10, 1:15, 1:20	Working T&H	‘-20 to 60° C
Power supply	‘+24 VDC ±15%,ripple ≤0.5% ‘3.0 V10ah lithium battery,battery voltage ‘2.0 V – 3.0V	Storage temperature Atmospheric pressure	‘-40 to 124°C ’86Kpa – 106Kpa